Everything You Need to Know About Staircase Design Before Remodeling (2024)

When it comes to elements of design that are the perfect marriage of form and function, nothing comes to mind quicker than a staircase. Over the centuries, residential staircases have transformed beyond their functional appeal into a true design powerhouse, providing pros and homeowners alike a chance to bring architectural interest, personality, and fun to spaces big and small.

Whether you’re tackling a home build from the ground up or are undertaking a remodel and looking to inject some visual interest into your staircase, there are endless ways to do so—and a few important pieces of lingo to understand before you start dreaming up ideas. Below, we’re recapping the basic anatomy of a staircase, plus all the ways in which you can show your personality through the design. Because building codes can vary greatly depending on the project and location, we haven’t really covered that here—but that doesn’t mean you can turn a blind eye. It’s always a good idea to touch base with a pro in your area (be that a contractor, inspector, or architect) ahead of starting a project to make sure whatever staircase changes you’re envisioning will be both stylish and safe.

Staircase Anatomy 101

Everything You Need to Know About Staircase Design Before Remodeling (1)

In this California home, designed by homeowner Carolyn Espley-Miller, a traditional stairwell commands the entryway.

Perhaps one of the most intricate designs and architectural details in a home, staircases have a surprising number of components. Learn the lingo below to talk the talk with contractors and design pros alike.

Stringer

A stringer is the support board that runs along each side of a staircase. It provides necessary structural support to the entire staircase and acts as a point of attachment for other elements, like the treads and risers. In most cases, one side (the inner stringer) is attached to a wall, while the other side (the outer stringer) is on the side of the staircase open to view. However, this can vary depending on the design of the staircase and the layout of the home.

Treads

At their most basic definition, treads are what you step on to climb your staircase. These horizontal pieces are typically a standard depth—10 to 11 inches at a minimum—to allow for easy (and thoughtless!) use of the staircase.

Risers

Risers are the vertical surface of a stair, where your toe kicks when walking up the treads of a staircase. While risers offer both stability and a spot for a decorative upgrade (more on that later!), they can also be left completely open to give the staircase a breezy “floating” effect. Like treads, risers are most often seen at a standard height (around 7 inches) to make walking up a staircase second nature.

Handrail

A handrail (also called a banister) is what you hold onto as you climb or descend a staircase. It provides much-needed stability and can appear on one or both sides of a residential staircase.

Baluster

In staircase lingo, a baluster refers to the vertical poles onto which the handrail is affixed. They act almost as a “guard rail,” preventing people (and objects) from falling off the side of the staircase. Balusters are also often referred to as spindles and can be a great place to add an element of design to your staircase to better suit your personality or the style of your home.

Newel

Located at the very top and bottom of your staircase (often at “ground” level), a newel refers to thicker support pieces that bookend your handrail and balusters to anchor the staircase into the rest of your home.

How To Upgrade The Design Of Your Staircase

For many homeowners, the staircase offers up an untapped opportunity for design personalization. From Colonial-inspired balusters in an 1800s New England home to an "invisible" stringer in a mid-century modern abode, incorporating the right elements into your staircase design can immediately upgrade not just your entryway or hallway, but your whole home. Here are a few fun ways to level up your staircase during your new remodel:

Everything You Need to Know About Staircase Design Before Remodeling (2)

Add A Runner

Staircase runners (aka carpet trailing down your stairs) are not just a practical solution for cutting down on slipping and sliding—they can add an element of design, too. Opt for durable sisal to add a timeless texture to your space or experiment with color and pattern to truly make a statement. In the stairwell above, designer Brian Watford laid down a graphic grey and white design to add a subtle modern touch.

Everything You Need to Know About Staircase Design Before Remodeling (3)

Invest in Decorative Balusters

As long as they pass inspection, there's no rule that says your chosen staircase balusters need to be boring. Look to an ornately turned wood design to add a touch of tradition to your space, or stick with forged iron for a look that marries timeless techniques with modern sensibilities. In his own family home (seen above), designer Jeffrey Alan Marks leaned into the beachy Montecito surroundings with balusters made of sturdy rope and attached with boat cleats.

Everything You Need to Know About Staircase Design Before Remodeling (4)

Opt For Ornate Risers

Do us a favor and go take a look at your staircase head-on—what do you see? Most of your field of vision is probably directed towards the risers of your stairs, making them a great place to add a bit of funk. Because most design additions you add to your risers won't impact the integrity of your stairs, you can really have a lot of fun with your options. Personalize them with a coat of your favorite paint color or add on decorative tile for a bit of old-world appeal. Another great option? Wallpaper! In her own Texas family home (seen above), HGTV star Grace Mitchell utilized wallpaper scraps to enliven the risers on a back staircase.

Everything You Need to Know About Staircase Design Before Remodeling (5)

Make Something "Invisible"

When it comes to jaw-dropping staircase design, glass elements are a great way to trick the eye and create a scene that looks truly trippy. From tempered glass treads that feel like you're walking on air to paneled glass "balusters," this design element is a clear winner when it comes to lending a gutsy, modern edge to a space. Bonus? It can be practical, too! Case in point: Designer Sarah Richardson used sleek panels of glass on the stairwell in a client's Ontario home (above) to give the look airy appeal and avoid detracting from the expansive windows behind the stairwell that reveal the ski slopes surrounding the chalet's exterior.

Follow House Beautiful on Instagram.

Everything You Need to Know About Staircase Design Before Remodeling (2024)

FAQs

What are the four general considerations for the design of a staircase? ›

5 Key Considerations for Staircase Design
  • Understand The Purpose. You must think about the purpose of the house staircase design. ...
  • Lighting. One of the most important staircase design considerations is the lighting. ...
  • Safety. ...
  • Staircase's Dimensions. ...
  • Right Composition.
May 7, 2024

What are the general notes on the design of stairs? ›

Width of stair - the width of stairs for public buildings should be 1.8 m and for residential buildings 0.9 m. Length - the flight of the stairs should be restricted to a maximum of 12 and minimum of 3 steps. Pitch of stair - the pitch of long stairs should be made flatter by introducing landing.

What is the rule for stairs? ›

The IRC stairs code states that, to comply with stairway requirements, the minimum width for residential stairs be no less than 36 inches. The stair riser code is up to 7.75 inches, and can not vary more than 3/8 of an inch. There are also section codes in place for standard stair tread dimensions.

What are the staircase basics? ›

There are three basic features to every staircase. The riser is the vertical space connecting the steps. The tread is the part of the step that someone stands on. The stringer is the side board that connects the stairs.

What are the essential requirements of good stairs? ›

Length of flight: A maximum of 12 and a minimum of 3 flights of steps must be made mandatory. Pitch of the stair: The slope of stair must not be more than 40◦ and less than 25◦. Headroom: A minimum of 2.14m of headroom above the flight must be built.

What is the basic rule when using stairs? ›

Always use handrails when ascending or descending any stairway. Be cautious of environmental conditions such as ice, snow, or rain accumulation that may build up on the steps of stairways.

What are the terminologies used in staircase design? ›

Rail Profile: the shape in section of a rail. Rake: the angle of the stair's rise. Rake Rail: a rail at an angle or pitch, typically a rail on a stair. Reeding: a series of parallel beads used as decorative detail on vertical surfaces of elements like balusters and newels.

What are the design requirements for stairs? ›

The minimum width of a stairway should be 0.90 m for one-way traffic and 1.50 m for two-way traffic. For indoor stairs, the riser should be between 0.12 m and 0.18 m, and the tread between 0.28 m and 0.35 m. For outdoor stairs, the maximum riser should be 0.15 m and the minimum tread should be 0.30 m.

What is the formula for stairs in architecture? ›

The following is a rule-of-thumb formula for interior stairs, as specified in the Architectural Graphic Standards. Riser + Tread = 17.5 inches (445mm): 7.5 inches (191mm) for the riser height; 10 inches (254mm) for the tread depth. Riser * Tread = 75 inches (1905mm).

What are the 5 rules of architecture? ›

In the course of his work as an architect, Le Corbusier developed a series of architectural principles, which he used as the basis of his designs. The design principles include the following five points by Le Corbusier: Pilotis (pillars), roof garden, open floor plan, long windows and open facades.

What to consider when designing stairs? ›

What should you consider when deciding on the size, location and placement of your staircase? Often a staircase is the main focal point to an entrance hall. Therefore, the design should work in a way that leads you into the home and guides you through the ground floor areas, as well as the first floor.

What are the standard stair details? ›

Rise (R) : 150mm to 180mm • Tread (T) : 220 mm to 250 mm- for residential buildings. The width of the stair • 0.8 m to 1 m for residential building and • 1.8 m to 2 m for public building. The width of the landing is equal to the width of stairs.

What are three factors to consider when designing a staircase and ramp? ›

In this guide, we'll go over four points that you need to consider when choosing a staircase for your house.
  • Amount of Available Space.
  • Budget.
  • The Home's Occupants.
  • Local Building Regulations.
  • Final Words.

What are the elements of stair design? ›

When designing a staircase these are the basic components. There are Stringers, Treads, Risers, Newels, Winders and Landings, Handrail's and Balusters. Stringer – The inclined boards in which the treads and risers are enclosed. Tread – The top or horizontal surface of a step.

Top Articles
Latest Posts
Article information

Author: Madonna Wisozk

Last Updated:

Views: 5918

Rating: 4.8 / 5 (48 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Madonna Wisozk

Birthday: 2001-02-23

Address: 656 Gerhold Summit, Sidneyberg, FL 78179-2512

Phone: +6742282696652

Job: Customer Banking Liaison

Hobby: Flower arranging, Yo-yoing, Tai chi, Rowing, Macrame, Urban exploration, Knife making

Introduction: My name is Madonna Wisozk, I am a attractive, healthy, thoughtful, faithful, open, vivacious, zany person who loves writing and wants to share my knowledge and understanding with you.